|
D3200 Rear View
USB USB stands for Universal Serial Bus, and is an interface for transferring data between a computer and peripheral devices. USB peripheral devices such as hard drives or CD-R/RW drives cannot be connected to the D3200. The D3200 has a USB connector which can be connected directly to your computer, allowing you to save data from the PC drive to your computer, or load data from your computer to the PC drive.
Foot Switch Using a foot switch for manual punch-in/out You can switch between playback and recording by pressing a PS-100 (momentary) foot switch (sold separately). This lets you punch-in/out while you perform, or when the D3200 is located at a distance. (1) Connect a foot switch to the FOOT SWITCH jack. (2) Access the SYSTEM/MIDI, “Control” tab page, and specify the function of the foot switch. Click “PunchIn–Out” in the “Function” to select.
Expression Pedal An expression pedal will control the effect you assign in the "Control" section in realtime. Connect an expression pedal (such as the separately sold XVP-10 or EXP-2) to the EXPRESSION PEDAL jack.
S/P DIF Digital Input and Output The D3200 lets you input and record digital sources from the S/P DIF inputs. You can input a digital source only if its sampling frequency matches the sampling frequency of the currently selected song. If you input a 24-bit signal into a 16-bit song, the sound you monitor will be 24-bit, but it will be converted to 16-bit data when it is recorded.
|
