|
01/W Series |
Initialization: Hold Reset and Compare while
turning it on. |
Preload: Global screen 7 Press G then E |
ROM Check: Hold Reset while turning it on. |
|
03R/W |
Initialization: Hold Edit and 1 while turning it
on. |
Preload: Global screen 5D, then select “OK”. |
ROM Check: Hold +1 and -1 while turning it on. |
|
05R/W |
Initialization: Hold Edit and 1 while turning it
on. |
Preload: Global Screen 5A, then select “OK”. |
ROM Check: Hold Edit and Global/Multi while
turning it on. |
|
168RC |
Initialization: Hold leftmost Knob under screen
and Up and Down while turning it on. |
Preload: Factory data must be transmitted and
returned via SysEx dump. |
ROM Check: Given on power up. |
|
A1 |
Initialization: Hold Write and –1 while turning it
on. |
Preload: Card Load (SPC0A1) |
ROM Check: Hold Write while turning it on. |
|
A2/A3 |
Initialization: Hold Chain/Effect and B while
turning it on. |
Preload: Hold Up and Down arrows while turning it
on. Press |
ROM Check: Hold Utility, Up and A while turning
the unit on. Press F. Set M/R to M/S and D/R to D/S. Hold Utility and
F. |
|
A4 |
Initialization: Battery Removal |
Preload: Hold Bank Up and Write while turning it
on. PL appears, press write again. |
ROM Check: N/A |
|
A5 |
Initialization: Battery Removal |
Preload: Hold Mode Footswitch and Write while
turning it on. Press Footswtich 1, F is dispayed on screen. |
ROM Check: N/A |
|
AX1000G |
Initialization: Battery Removal |
Preload: Hold Bank footswitch and Exit button
while turning it on. Press Write button to load the factory programs.
|
ROM Check: N/A |
|
AX100G |
Initialization: Battery Removal |
Preload: Hold FX Select EXIT button while turning
it on. Press write button.
|
ROM Check: N/A |
|
AX1500G |
Initialization: Battery Removal |
Preload: 1. Hold down Bank footswitch EXIT button
while turning it on. Then press Write button.
|
ROM Check: N/A |
|
AX1G/B |
Initialization: Battery Removal |
Preload: Hold down the left arrow key and the "+
while powering on. Then press the "+" button again. |
ROM Check: N/A |
|
AX300G/B |
Initialization: Battery Removal |
Preload: Hold Param/Value and Compare/Write while
turning it on. Then Compare/Write once again. |
ROM Check: N/A |
|
C-Series |
Initialization: Hold MIDI/Transpose and Split
buttons while turning it on. |
Preload: Disk Load C900 (CFD01P) Ci86/9600
(CID00PE ) |
ROM Check: N/A |
|
CX-3 |
Initialization: Hold Program 2 and 7 while turning
it on. |
Preload: Hold Program 2 and 7 while turning it on. |
ROM Check: N/A |
|
D Series |
Initialization: System, Disk Utility, Initialize
Execute |
Preload: Backup CDs |
ROM Check: Given on power up. |
|
G3 |
Initialization: Battery Removal |
Preload: Hold Bank and Write while turning it on.
Release both and then press Write again. |
ROM Check: N/A |
|
i1/i2/i3 |
Initialization: Hold Edit/Style and Arrange/Play
while turning it on. |
Preload: Disk Load (IFD01P for i3 and i2, IFD02P
for i1) |
ROM Check: Hold Enter and 7 while turning it on. |
|
I30 |
Initialization: Hold Arr.Play and Global while
turning it on. |
Preload: Disk Load (I30FD00P) |
ROM Check: Given on power up. |
|
i5S/M |
Initialization: Hold Arr.Play and Global while
turning it on. |
Preload: Disk Load (IFD00P) |
ROM Check: Hold Global while turning it on. |
|
iS35/40/50/B i40M |
Initialization: Hold Arr.Play and Global while
turning it on. |
Preload: Disk Load (IFDD1006 except for iS40 and
i40M which is FDD1007) |
ROM Check: Hold Disk/Global while turning it on. |
|
iX300 |
Initialization: Hold Arr.Play and Global while
turning it on. |
Preload: Disk Load (IXD00P) |
ROM Check: Hold Disk/Global while turning it on. |
|
KAOSS Pad |
Initialization: Hold 3, FX and HOLD buttons while
turning it on. L appears in screen. Then press 1,3,5,1,3,5. |
Preload: N/A |
ROM Check: N/A |
|
KARMA |
Initialization: Hold Enter and 0 while turning it
on |
Preload: Disk Load (KMFD00P) |
ROM Check: Given on power up. |
|
M1 |
Initialization: Hold Int, Card and Combi while
turning it on. |
Preload: Card Load (MPC00P) |
ROM Check: Hold INT while turning it on. |
|
M1R/M1REX |
Initialization: Hold Int, Combi and Prog while
turning it on. |
Preload: Card Load (MPC00P, MPC0EX for EX model) |
ROM Check: Hold INT while turning it on. |
|
M3R |
Initialization: Hold Edit and No while turning it
on. |
Preload: Global screen 5D “OK”, then select "O.K." |
ROM Check: Hold Edit and Global while turning it
on. |
|
MS2000/2000R |
Initialization: Hold Mod Sequencer On/Off and 3
while turning it on. |
Preload: Global screen 2D, then select "OK". |
ROM Check: Hold Mod Sequencer On/Off and 5 while
turning it on. |
|
N1/N5/EX |
Initialization: Test Mode - Hold Enter and 7 while
turning it on, then Page> to skip to "Ready to Boot", press Enter. |
Preload: Press Utility, select "Factory Reset"
then press Enter. |
ROM Check: Hold 10s hold and Enter while turning
it on. |
|
N1R |
Initialization: Test Mode - Hold Global and Dec-
while turning it on, Page> skips to "Ready to Boot", press Enter. |
Preload: Press Global, Page > to Init. Select
"Factory Preload" then press Enter. |
ROM Check: Hold Edit/Enter and Global while
turning it on. |
|
N364/N264 |
Initialization: Hold Enter and 7 while turning it
on. |
Preload: Disk Load (NSD3) |
ROM Check: Hold Enter and 7 while turning it on. |
|
NX/NS5R |
Initialization: Hold Param. > and < while turning
it on. |
Preload: Enter button, then select Utility,
Preset, Factory Preset, Yes. |
ROM Check: Hold Param < and> while turning it on. |
|
PA80/60 |
Initialization: N/A |
Preload: Disk Load (6 Disk set available from
korgpa.com) |
ROM Check: Given on power up. |
|
Prophecy |
Initialization: Battery Removal |
Preload: Global screen 19, press Enter. |
ROM Check: Hold Enter and Exit while turning it
on. |
|
PX1 |
Initialization: Battery Removal |
Preload: Metronome and Enter buttons while
powering on. Then press the "+" button. |
ROM Check: N/A |
|
PX2 |
Initialization: Battery Removal |
Preload: Rhythm and Enter buttons while powering
on. Then press the "+" button. |
ROM Check: N/A |
|
PX3/PX3B |
Initialization: Battery Removal |
Preload: PX3:
Rhythm/Aux and "+" button while powering on. Then
press the Bypass/Tune button. PX3B: HBB and "+" button while powering
on. Then press Bypass/Tune. |
ROM Check: N/A |
|
PX4/PX4B |
Initialization: Battery Removal |
Preload: PX4: Rhythm and UP arrow buttons while
powering on. Then press Enter/Rec. PX4B: Rhythm and Up arrow buttons
while powering up. Then press press Enter/Rec. |
ROM Check: N/A |
|
S3 |
Initialization: Hold Stop and S1 while turning it
on. |
Preload: Hold Stop and S1 while turning it on. |
ROM Check: Hold Stop and S4 while turning it on. |
|
SG Rack |
Initialization: Edit and Yes while turning it on. |
Preload: Global screen 7, then select "O.K". |
ROM Check: Hold Edit and FX On/Off while turning
it on. |
|
SGPROX |
Initialization: Hold Program and Piano 8 while
turning it on. |
Preload: Program Edit mode screen 14 (Each
program!) |
ROM Check: Hold Program and Piano 7 while turning
it on. |
|
SP500 |
Initialization: Hold Function and Mixer while
turning it on. |
Preload: Function screen 7. |
ROM Check: Hold Function and Mixer while turning
it on. |
|
T Series |
Initialization: Hold Fine and Prog A while turning
it on. |
Preload: Disk Load (TSD00PII) |
ROM Check: Hold Fine and Program A while turning
it on (Will initialize… back up!) |
|
Trinity Series |
Initialization: Hold Enter and 0 while turning it
on |
Preload: Disk Load (TFD00P and TFD01P) |
ROM Check: Given on power up. |
|
Triton Classic/ST |
Initialization: Hold Enter and 0 while turning it
on |
Preload: Disk Load (TNFD00P and TNFD01P for
Classic, Hard Drive contains preload for Studio) |
ROM Check: Given on power up. |
|
Triton LE |
Initialization: Hold Enter and 0 while turning it
on |
Preload: Global mode, F8, Select "Preload" |
ROM Check: Given on power up. |
|
Triton Rack |
Initialization: Hold Enter and 0 while turning it
on |
Preload: Disk Load (TNRFD00P and TNRFD01P) |
ROM Check: Given on power up. |
|
TRR |
Initialization: Hold A4 and Edit while turning it
on. |
Preload: Global screen 10, then select "OK". |
ROM Check: Hold Enter and Yes while turning it on. |
|
WS/WSEX/AD |
Initialization: Power on, wait for "Wavestation"
to flash then Cursor down and 4. Enter Init screen from there. |
Preload: Card Load (WPC00PI, II and III) |
ROM Check: Power on, wait for "Wavestation" to
flash then Cursor down and 4. |
|
WSSR |
Initialization: Hold Down Cursor, Bank, Edit and
Yes while on. Enter Init screen from there. |
Preload: Card Load (WPC00PI, II and III) |
ROM Check: Hold Down Cursor, Bank Edit and Yes
while on. |
|
X2/X3/X3R |
Initialization: Hold Page Down and 0 while turning
it on |
Preload: Disk Load (XSD00P) |
ROM Check: Hold Enter and 7 while turning it on. |
|
X5/X5D/DR |
Initialization: Hold Page + and Page - while
turning it on. |
Preload: Global Screen 5A, then select “OK”. |
ROM Check: Hold Edit and Global/Multi while
turning it on. |
|
Z1/Z1EX |
Initialization: Hold down SW1 and SW2 while
turning it on. |
Preload: Preload screen in global mode. |
ROM Check: Hold Exit and Enter while turning it
on. |