|
VOX VC4 Foot Controller for Valvetronix
Each section of the Valvetronix AD60VT and AD120VT can be controlled independently from the top panel, or, in the case of Modulation, from the optional VC-4 Foot Controller.
Step by step instructions:
To change banks:
1) Hold down button for 2 seconds 2) Tap buttons 1 - 4 to pick the bank
To change programs:
Just tap one of the four buttons to active program 1 -4 in each bank.
To turn on/off individual effects
1) Tap the FX On/OFF button once 2) Tap button # 1 - Pedal Effects on/off Tap button # 2 - Modulation Effects on/off Tap button # 3 - Delay Effects on/off Tap button # 4 - Reverb Effects on/off
To set delay time using "Tap Tempo" button
1) Go to individual mode 2) Tap the tempo you desire (requires two taps)
To activate tuner mode: Mode 1 - tune while hearing your guitar (hold down for 2 seconds) Mode 2 - tune while muting your guitar volume (hold down for 3 seconds) Any of the 4 program buttons will turn the tuner on or off.
To turn it off, just hit the button again.
To use expression pedal as a volume pedal
Hold down until red light (top left of the expression pedal) goes off
CONNECTORS: Vox bus jack, Volume jack DIMENSIONS: 417.0(W) x 158.4(D) x 63.3(H) mm / 16.42(W)" x 6.24(D)" x 2.49(H)" WEIGHT: 1.8 KG / 4.82 LBS. ACCESSORIES: 10 Base-T cable (straight type) |
Back to Valvetronix
For KORG products: Keyboards, Controllers - software, Dance-Video, Recording, Tuners, ToneWorks