|
To change the tempo in
the middle of a song:
1.Press the SEQ button to enter the Sequencer mode.
2.Press the Menu button.
3.Touch "Track Edit" to enter the Track Edit page.
4.Touch "Track01".
5.Using the value wheel, slider or buttons, select "MTR:". This
is the Master control track, which controls tempo.
6.Touch the arrow on the top right hand side of the screen.
7.Touch "Create Control Data".
You will need to set the Start and End measures that the tempo will be
affected on. You can either make a gradual or abrupt tempo change,
depending on the "distance" between the Start and End measure
the you select. The tempo changes gradually from the original tempo to the
new tempo in the time given between the Start and End measure. The closer
they are in number, the faster the tempo change will take place. If the
Start and End measure are set the same, the tempo change will be instant.
8.Touch the parameter next to "From Measure".
9.Using the value wheel, slider or buttons, select the measure that the
tempo should start to change on.
10.Touch the parameter next to "To Measure".
11.Using the value wheel, slider or buttons, select the measure that the
tempo change should finish taking place on.
12.Touch the parameter under "Start Value".
13.Using the value wheel, slider or buttons, select the song's current
tempo value.
14.Touch the parameter under "End Value".
15.Using the value wheel, slider or buttons, select the new tempo
value.
16.Touch O.K. The Tempo value change has been placed in the master control
track.
17.Touch arrow next to "Manual" near the top right hand side of
the screen.
18.Touch "Auto", which will allow the sequencer to see the
changes on the tempo track.
|